To keep the Amped extender’s performance at the top level, it is recommended that the firmware update process is carried out timely. However, many users out there struggle to get the firmware of their Amped device updated. Are you also failing to update your Amped extender? Yes? Relax! Take the help of the Amped extender troubleshooting tips jotted down in the post and learn how to do away with the problem troubling you.
[Solved] Amped Extender Firmware Update Failed
-
Check the Internet Connection
The internet connection is a primary requirement while updating the Amped extender’s firmware. Are you having access to a flawless internet connection? It seems that you’re not. Do you know where you might have gone wrong? Well, you might have failed to create a strong extender-router connection.
Thus, in order to have access to a strong internet connection, you have to connect your Amped extender and the host router properly. If you have put a wireless source to use, then keep them at an accurate distance. However, the Ethernet cable is supposed to be free of wear and tear in the case of a wired connection.
-
Remove Viruses from PC
Perhaps, the PC you are using to get the firmware of your Amped range extender updated has been tainted by viruses or malware. Know that the presence of any of these things can halt you from updating the firmware of your Amped device.
So, it is time to scan for the existence of viruses on your desktop. Wondering how to do that? Well, you have to take the assistance of an antivirus application for that. Third-party or in-built software as per the OS of your PC can be used. If any viruses or malware are found, you ought to delete them and retry updating the Amped extender’s firmware by accessing the Amped wireless login page.
-
Reboot the Extender
Technical glitches can’t be ignored when it comes to creating issues with the Amped extender. Chances are that the firmware update process failed to complete due to technical glitches. Before you become a victim of any other problem, it is advised to reboot the extender.
Rebooting the extender is super easy. No need to step out of home and buy new stuff! Just remove the power cable of the Amped extender from the socket, let the extender rest, and insert the extender’s power cable back into the outlet. Once done, see if you are still failing to get your WiFi device upgraded.
-
Check the Firmware File
The most common mistake committed by users while updating the Amped range extender’s firmware is the uploading of an incorrect firmware file. Chances are that you did the same.
Remember that you have to upload the firmware file pertaining to the model number of the Amped extender you own. Uploading the wrong file will create only issues instead of introducing new features to your device.
-
Reset the Extender
Tried your luck using every troubleshooting tip mentioned above but are you still empty-handed? Now, it is high time to get your extender restored to the factory default mode. It will delete every customized setting from your Amped extender and allow you to start fresh.
Thus, without waiting any more start your hunt for the Reset button on your Amped device. Once your hunt gets completed, press the button with great care. Within some time, you will discover that your extender is now working on the factory default mode. Now, access http //setup.ampedwireless.com and install your Amped extender from the beginning.
To End Things Off
Did you get success in resolving the Amped extender firmware update failed issue after giving a shot to the above-discussed hacks? If yes, then congratulations. Also, we would love to know your troubleshooting experience in the comment section.