Netgear routers are ruling over the world with their marvelous performance. Millions trust Netgear WiFi routers when it comes to accessing super-fast internet. But, at times, many users have reported that they are unable to log in to their router via the 192.168.1.254 default IP address. If you are also dealing with the same issue, then we’ve got your back. Here, we will provide you various solutions that will help you get rid of it. So, read on.
Fixed: Can’t Log in to Router Via 192.168.1.254 IP
-
Use Correct IP Address
Sometimes, users can’t log in to their Netgear router via the IP address because only certain router models support this IP. Therefore, make sure that the IP address entered by you is compatible with your router.
So, try using a different set of IP addresses or the default web address of your Netgear router. If you still don’t get success, look for the next solution.
-
Enter the Correct Login Details
Users can also come across the ‘can’t log in to router via 192.168.1.254 IP’ issue due to the use of incorrect login details. So, we recommend you cross-check the username and password you’ve entered. Bear in mind that the default login credentials are case-sensitive and even a little mistake can prevent you from accessing the Netgear Genie setup wizard. Therefore, try to avoid typos while entering the login details and turn the Caps Lock key on your keyboard off.
Note: If you’ve changed the default login details in the past, consider using them to log in to your router via the 192.168.1.254 IP address.
-
Connect Your Router and Modem Properly
Verify the connection between your Netgear router and modem. If there is a wireless connection between them, then you’ve found another reason that is preventing you from logging in to your router via the default IP.
The wireless connection is generally weaker than the wired one. Therefore, it is advised to connect both devices using a damage-free Ethernet cable. Also, ensure that the connection is precise. You can also set up guest network on Netgear WiFi router.
-
Update Your Web Browser
An outdated web browser might also be one of the reasons that won’t allow you to log in to your router via the 192.168.1.254 IP address. To get the issue fixed, update your web browser as soon as possible.
But, updating the web browser is not the only thing that will bring you success. You also have to clear the cache, cookies, and browsing history of your web browser by heading toward its settings.
-
Reboot Your Netgear Router
If your Netgear router is dealing with technical glitches, then it will also create issues while performing login via the 192.168.1.254 IP address.
Therefore, to get the issue fixed, all you need is to reboot your Netgear wireless router. Just switch it off. Wait for some time and switch your WiFi device again to see if the issue resolves.
-
Reset Your Router
Do the aforementioned troubleshooting hacks fail to fix the issue for you? No worries! The last resort you have left with is to perform a factory default reset of your Netgear wireless router. It will surely help you get rid of the issue.
Follow the instructions given below to restore your Netgear WiFi router to factory default settings:
- Switch on your Netgear router and ensure that the power LED is glowing green.
- Now, head over to the Reset button on your WiFi device.
- Grab a sharp object that is handy and press the Reset button with its help.
- Wait for a while and release the button.
- Now, your WiFi device will get restored to its factory default settings and you have to perform Netgear router setup from scratch.
Conclusion
192.168.1.254 IP address acts as a gateway to configure your WiFi device and access its settings. We hope that you will be able to get rid of the ‘can’t log in to router via 192.168.1.254 IP’ issue.