Dlinkrouter.local not working is one of the most common issues that users face with their D-Link wireless routers. If you are also experiencing the same issue with your D-Link WiFi device, it might be because of the following reasons:
- Insufficient power supply
- Loose cable connections
- Incorrect web address
- Outdated firmware
- WiFi interference
- Outdated internet browser
- Incorrect login credentials
- Technical glitches
- WiFi devices placed too close
- Installed antivirus software
Regardless of why you are facing the dlinkrouter.local not working issue, if you follow the troubleshooting tips mentioned below, you will surely be able to resolve it.
Dlinkrouter.local Not Working (Solved)
- Reboot Your D-Link Router
Rebooting your D-Link wireless router is the first thing that you should do to get rid of the dlinkrouter.local not working issue. Here is how you can reboot your device:
- Power off your router and unplug it from its power source.
- Wait for a few seconds.
- Plug your router back into its wall socket and turn it on.
If you are also experiencing the http //dlinkap.local not working issue, then rebooting the device might work too.
- Use the Correct Web Address
Are you one of those people who have a thing for committing typos every time that they type something in the address bar of their web browser?
If you are nodding your head in yes, then now you know why you can’t access dlinkrouter.local: because of an incorrect web address. Therefore, make sure that you type the correct web address in the address bar of your web browser.
- Check the Power Supply
Are you sure that your D-Link wireless router is getting an uninterrupted power supply from the wall socket? Probably not. Thus, make sure that your WiFi device is plugged into a damaged free wall socket.
- Verify the Ethernet Connection
Maybe the Ethernet cable connecting your D-Link wireless router and the existing modem is worn out or damaged.
To troubleshoot the issue, you can follow any of these two options:
- Get the Ethernet cable that you are currently using replaced with a new one.
- Connect your D-Link router to the existing modem using a wireless source.
Are you still going nuts because of the dlinkrouter.local not working issue. Well, in that case, take the help of the next troubleshooting hack.
- Place Router Near Modem
Apart from ensuring a secure connection between your D-Link wireless router and the existing modem, also make sure that the distance between them is not too much.
If it is, relocate your router and place it in the same room as that of the existing modem. Additionally, do not place your router or modem near mirrors, fish tanks, treadmills, televisions, refrigerators, microwave ovens, baby monitors, cordless phones, washing machines, aluminum studs, Bluetooth speakers, etc. Such devices can interrupt or in certain cases, block the WiFi signals of your router and modem.
- Update Your Internet Browser
If the internet browser that you are using is outdated, then also you can come across the dlinkrouter.local not working issue. But, nothing to worry about.
In order to get rid of the issue, it is recommended that you go to the Settings option of your internet browser and click Update.
- Disable Antivirus Software
Sometimes, an antivirus software can also stop you from logging in to your device successfully. Therefore, you know what to do: temporarily disable the antivirus software installed on your WiFi-enabled device.
- Reset Your D-Link Router
If you have you followed every troubleshooting tip mentioned above and nothing has helped you fix the dlinkrouter.local not working issue, you should consider resetting your D-Link wireless router.
Follow the steps mentioned to restore your D-Link router to the factory default mode:
- Locate the Reset button located on your home wireless router.
- Use an oil pin to press the Reset button.
- Wait for some time.
Thereafter, refer to the guidelines mentioned in this user manual and reconfigure your Dlink wireless router.
Note: If you want to reset your Dlink WiFi extender, you can take the help of the steps mentioned above.
Final Thoughts
As mentioned earlier, facing the dlinkrouter.local not working issue is one of the most common issues that users experience with their D-Link routers. However, if you walk through the aforementioned troubleshooting tips, you wouldn’t really face any issue in resolving the issue at hand.