Saturday Sep 30, 2023

How to Boost Comfast WiFi Extender Performance?

How to Boost Comfast WiFi Extender Performance

Comfast WiFi extenders can be trusted blindly when it comes to providing the user with a reliable internet connection. However, it has been noted that some users struggle to resolve the poor internet performance even after doing Comfast WiFi extender setup. Are you also one of them? If yes, then this post will help you a lot.

Here, we will provide you with various tips that will help you boost the performance of your Comfast wireless range extender. So, read on.

Tips to Boost Comfast Extender Performance

  1. Do the Placement Correctly

Most users are unaware of the correct placement of their range extenders and end up selecting the worst one. Chances are that you’ve done the same mistake. No worries. You can still boost the Comfast extender performance by selecting a perfect location. Here’s how to choose a good location for your Comfast device:

  • Try to place the Comfast range extender in the central location of your house.

  • Never select a congested room to place your Comfast device.

  • Corners should be avoided when it selecting a location for the Comfast wireless range extender.

  • Thick concrete walls can block the extender’s WiFi signals. Thus, consider placing the extender at a distance away from the same.

  • Apart from these, things like microwave ovens, televisions, refrigerators, mirrors, fish tanks, aluminum studs, baby monitors, cellular phones, etc. must be away from your WiFi range extender.

  1. Move Extender Close to Router

You might also witness slow internet speeds with your Comfast extender if there is an immense gap separating your WiFi devices. Know that too much distance between them will throw a lot of interference in the path of the extender which is not a good sign.

Thus, aim towards shortening the distance between your Comfast device and router. But, make sure that both devices are not placed too close. Else, you’ll soon have to go for further troubleshooting in case their WiFi signals clash.

  1. Mend the Ethernet Connection

During the Comfast setup process, users are advised to use an Ethernet cable to connect their WiFi devices. But, it seems that you never checked the Ethernet cable after setting up the extender. Perhaps the Ethernet connection between your devices has become weak.

Thus, we advise you to check the condition of the Ethernet cable first. If any cut or damage is found, replace the Ethernet cable right away. Additionally, try to make the connection finger-tight and strong.

  1. Reboot the Extender

Being an owner of a networking device is more than accessing a high-speed internet connection. You can’t ignore your Comfast range extender at any cost. It is because rebooting the Comfast device is a good way to bid adieu to technical glitches. Given below are the steps that will help you reboot your Comfast extender properly:

  • Switch off your Comfast.

  • Unplug the range extender from the wall socket.

  • Now, wait for a few minutes.

  • Re-plug the range extender into the wall outlet.

  • Press the Power button to switch on your Comfast range extender.

  1. Update the Firmware

Updating the Comfast firmware is another way to boost the range extender’s performance. You might be aware that the range extender runs on software that has a few instructions. These instructions are time to time renewed so that the extender can get equipped with new features. Renewal of these instructions is called firmware update that needs to be installed on your range extender as soon as they are altered. The following steps will make you acquainted with the process to update the firmware of your Comfast range extender.

Power up the extender and connect it to the router.

Download the Comfast firmware file on your computer using a secure web browser.

Once done, access the Comfast login page using the extender’s default IP address.

Log in to the Comfast extender now.

Locate the Firmware Update option and upload the file you’ve downloaded.

By following these instructions, you will be able to boost the performance of your Comfast wireless range extender by updating its firmware.

Sum Up

Slow internet problem is one of the most annoying issues. However, following the tips shared in this post will help you boost WiFi extender performance. Hopefully, you will be able to do so by referring to this post. In case nothing works, consider resetting your Comfast by pressing the Reset button and reconfiguring it using the default IP address.

Back to Top