Tired of having fluctuating WiFi signals throughout your house? If so, you must install a Wavlink router. Don’t know how to do that? No issue! We are here to help you out. From setting your router to choosing the right place, this post is going to cover everything for you. So, make sure you get through each point without skipping anything.
With that being said, let’s move forward. Make sure you prepare your device first before initiating the Wavlink router login process. Read on.
Wavlink Router Login with Web Browser
Choose Placement
Before turning on the device, you should choose the right placement. The Wavlink router should have open space that permits the free flow of WiFi signals from the router. Also, you need to avoid electronic devices that can easily hamper the flow of WiFi signals of your router.
For the best placement, you should choose a higher surface so that signals don’t get interrupted. Moreover, avoid the windows so that signals don’t get lost.
Connect with Modem
To access the router login page, you need to connect your Wavlink router to an internet source. That is why you should connect it to your host router. We would advise you to go for the wired connection. Thus, get hold of an Ethernet cable and connect it to the router and modem.
However, if you don’t know how to manage wired connections, you should establish a wireless connection. During wireless connection, you need to keep the distance between the devices in check.
Turn on Router
After the initial setup, you need to turn on your Wavlink router. Hence, choose a properly working wall socket to plug in your device. It should not have any signs of short-circuiting. Apart from that, the device should fit into the wall socket without any hassle.
If the router is loose in the socket, it could lead to power fluctuation or inconsistent power supply to the router. You must avoid it at all costs.
Get Hold of the PC
Further, you will need a working PC or laptop to do the Wavlink router login. Therefore, make sure you use only an up-to-date PC. In case you wish to use a laptop, you need to get its charger by your side. Otherwise, the device will turn off and the login process will have to suffer.
Therefore, you need to avoid inconsistent power supply to the computer or laptop used.
Open Web Browser
Launch a web browser once the computer gets stable. It will help you get access to the Wavlink default URL. When choosing a web browser, you need to be careful of a few things. For instance, it should be updated to the latest software version.
Apart from that, the web browser must be compatible first with your computer. And, it should also be compatible with the website you want to open.
Enter Default URL
Open the internet browser, take your mouse to the address bar, and click on it. That is where you are going to enter the default URL. Hence, you can easily get access to the Wavlink router setup wizard. However, you need to make sure that the web address entered should be correct.
There should be no typing errors. Moreover, you need to use the address bar of your web browser instead of the search bar to enter the address.
Do Login
The final step is to do the login. For that, you are required to have a set of login details. Usually, a Wavlink router login requires only a password. Therefore, make sure you know your default password. After typing it, hit the Login button.
Conclusion
We hope the login process was easier. After that, you can change its settings and get the best out of the router. Make sure you leave feedback in the comment section given below.
Read more: How To Set Up Wavlink WiFi Extender?