Saturday Dec 03, 2022

How to Fix TP-Link Repeater Not Connecting to Internet Issue?

Is your TP-Link wireless repeater not connecting to the internet? Well, that is unfortunate. But, worry not because we are here to get you lucky. In this article, we have summed up some troubleshooting hacks that will help you fix the tplinkrepeater not connecting to the internet issue. So, what are you waiting for? Read on.

Fixed: TP-Link Repeater Not Connecting to Internet

  1. Verify the Ethernet Connection

Start by checking whether the Ethernet cable you have used to connect your TP-Link repeater and your home router is worn out or damaged. If it is, get it replaced with a new Ethernet cable without wasting any more time. In case you don’t want to do that, consider connecting your devices with a wireless source.

Now, try to connect your TP-Link repeater to the internet and access tplinkrepeater.net Are you able to? No? Well, in that case, continue reading.

  1. Place Your Devices in Close Proximity

Too much distance between your devices can also lead you to the TP-Link wireless range extender not connecting to internet issue. Therefore, place your devices close to each other.

  1. Get Rid of Signal Interference

Perhaps your TP-Link wireless repeater is placed somewhere near things like:

  • Cordless phones
  • Washing machines
  • Baby monitors
  • Mirrors
  • Fish tanks
  • Refrigerators
  • Microwave ovens
  • Treadmills
  • Televisions
  • Bluetooth speakers

Apart from this, also avoid placing your TP-Link wireless repeater in corners or near thick concrete walls. Otherwise, the WiFi signals of your repeater will get interrupted or blocked and disable you from accessing the internet on your client devices.

  1. Reboot Your TP-Link Repeater

You can also try rebooting your device in order to get rid of the TP-Link wireless repeater not connecting to internet issue.

Follow the below-mentioned instructions and learn how to reboot your device:

  • Disconnect all your WiFi-enabled devices connected to the network of your repeater.
  • Power off your TP-Link repeater and unplug it from the wall socket.
  • Wait for a couple of seconds.
  • Thereafter, plug your repeater back into its wall outlet and press the Power button.
  • Reconnect your WiFi-enabled devices to the network of your repeater.

Are you struggling with the TP-Link repeater not connecting to internet issue? Well, it might be because of an outdated firmware.

  1. Perform TP-Link Firmware Update

As mentioned above, you might also be facing the TP-Link repeater not connecting to internet issue because of an outdated firmware.

Thus, update the firmware of your wireless device to the latest version. If you are not sure about the process of TP-Link firmware update, refer to the guidelines mentioned in this user manual. Apart from the instructions to update your repeater, you will also find other details regarding your device in there.

  1. Reset And Reconfigure

If none of the aforementioned tips have helped you in resolving the TP-Link repeater not connecting to internet issue, it’s properly because you haven’t performed TP Link setup properly. To troubleshoot the issue, it is recommended that you configure your device from scratch. But, before doing that, you need to restore it to the factory default settings.

Here is how you can reset your TP-Link wireless repeater:

  • Look at all sides of your TP-Link repeater and locate the Reset hole.
  • Take an oil pin and carefully insert it in the Reset hole.
  • Wait for some time.

Once you done with the reset process, set up TP Link extender by referring to the guidelines mentioned in this user manual.

Summing Up

Our guide to troubleshoot the TP-Link repeater not connecting to internet has come to an end here. We hope that after following the tips mentioned in this post, you will be able to get rid of the issue you were facing.

Back to Top