Friday Sep 22, 2023

As there is many ways to cook an egg, there are various kinds of automobile washes. They are available close to you by using And don’t assume that it will be a sign that all washing methods are alike. Far from it. Each has their own advantages and disadvantages. These pros and cons but, they’re often not clear. This is why we’ve decided to run through every method of washing in detail, separating the good and bad aspects to help you navigate the most crucial aspect of car maintenance.

Method #1: Handwash

Talk to any detailing professional and they’ll inform you of the safest method to wash your car. is to hand car wash. There are a variety of ways that handwashing can be accomplished that range from the classic two-bucket method , to the more modern pressurized foam cannons however, regardless of the method you choose the same thing is that you (or your personal detailer) washing the with soap and then washing the car with an easy-to-handle mitt. What is a handwash like? In our detailing service, Simon’s Shine Shop, we begin with a wash that involves covering the car with snow foam, then wash the car clean. This is not a must however, it can help us achieve a better clean. After that, we paint the car with another layer of suds. This we then stir with wash mitts that are soft. The foam breaks the dirt down, while the wash mitts break the particles loose. Then, we rinse and dry. This kind of washing requires plenty of time, as well as a range of equipment, and , if you’re hiring an expert, a little of cash. Between how gentle it’s on the surface and how effective it is in removing any heavy contaminants, it’s by far the most effective type of car wash you could perform.


  • Reduces scratching
  • Can remove heavy contamination


  • It takes longer than other methods.
  • Much more expensive than automated washes
  • More equipment is required than other methods.
  • It requires a lot of water
  • It is difficult to accomplish this with a small space
  • The task is difficult in colder temperatures.

Method #2: Waterless Wash

A waterless washing requires one spray bottle, and some microfiber towels. Spray the area using the waterless cleanser and then wipe it clean using a microfiber towel. The reason people use waterless wash is various reasons. For instance, they do not have enough space to wash their hands and they aren’t able to make use of water, are in the middle of a road trip, etc. In essence, it’s a choice of the last option. Why’s that? Waterless washes aren’t good at getting rid of heavy gunk. They’ll quickly get rid of dust but if you’ve just came back from a dirt trail, you’re unlikely to be able to get much success. Another issue is their potential to scratch. Although waterless wash products are designed to coat the surface with lubricant but they’re not quite as close to the slickness that comes from the foamy handwash. There’s an excellent chance that you’ll get up and move a small particulate across your surface which can cause scratches.


  • It’s not as time-consuming as handwashes or rinseless wash
  • It is possible to do this with a limited space
  • Doesn’t make use of water.
  • It only requires a waterless washing item and towels made of microfiber


  • More opportunities to scratch
  • Can’t remove heavy contamination

Method #3: Rinseless Wash

Rinseless washing is different than a wash that is water-free. In a sense it’s an amalgamation between handwash and waterless wash. When you use a rinseless wash it’s a matter of taking a small amount of your rinseless washing item and pour it with an ice bucket. The product won’t create any suds. That’s the reason you don’t have to rinse. What you must do after washing an area is to wipe it down until dry. Rinseless washes are done using wash mitts and microfiber towels. Many detailers favor using the “Garry Dean Method”, which is the process of soaking several microfiber towel in buckets that is filled with rinse-free wash products and water. Take one towel and wring it out and place it in a bucket to dry. After that, you spray the panel with a pre-wash solution and then grab a moist microfiber towel to begin cleaning. You grab your drying towel, then dry the panel and after that, you grab a fresh dry microfiber to complete your drying. Repeat the process panel-by-panel until your car is completely clean. The rinseless method of washing is usually preferred by people who are under water restrictions or who have limited space and also those who are concerned about the scratching that a waterless washing could cause. The method still causes more scratches than handwashes, but significantly less than a handwash. Also, you won’t be able to get rid of large amounts of dirt as you would by hand washing.


  • It is faster than handwashing
  • Requires less water than handwash
  • It requires less equipment than handwashing
  • It is possible to perform the task with a limited space
  • More resistant to scratching than a wash that is water-free


  • A handwash is more likely to cause scratches than handwash
  • Can’t remove heavy contamination
  • It requires greater equipment and tools than simple waterless wash

Method #4: Automatic Wash

Automatic car washes
These, sometimes referred to also as “tunnel” washes, generally require you to drive your car onto conveyer belts that will lead you through a set of blowers and brushes. The bristles on these brushes are usually contaminated by the abrasive residue of previous vehicles that can ruin the finish. They also use harsh cleaning chemicals which can strip coatings and waxes and dry out the paint which could cause it to start cracking, or even fade. So , why would anyone wish to make use of the wash? They’re affordable and take a short time to complete making them the most sought-after type of wash, due to their ease of use. Many people don’t even know or aren’t concerned about how they’re damaging their paintwork. This isn’t necessarily a problem for professional detailers. All scratching is the reason many people shell out for a paintwork repair!


  • Inexpensive
  • Fast


  • Causes severe scratching
  • Harsh chemicals can damage finish
  • It is not possible to eliminate heavy contamination.

Method #5: Brushless Wash

A “brushless car wash” is an automated wash that makes use of strips soft cloths instead of bristles as part of its equipment. You may think it will solve the issue of abrasive bristles breaking up your finish, but dirty cloths can scratch as hard as bristles. The dirt left by the thousands of vehicles that preceded you could cause damage to the finish. Furthermore the washes use those harsh chemical as we have mentioned earlier.


  • Inexpensive
  • Fast
  • Abrasive less than a traditional brush wash that is automatic


  • Causes substantial scratching
  • Harsh chemicals can damage finish
  • Might not be able to remove heavy contamination

Method #6: Touchless Wash

A “touchless car wash” cleanses your car without the using brushes or bristles. Instead the entire wash is carried out using chemical cleaners, pressure washers, and pressurized water. It sounds like it will solve every issue with other automatic washes? But it’s not quite that simple. First, you’ll still have harmful chemicals to contend with. Therefore, unless you wish to dry your paint or strip the coating or wax, ensure you are aware prior to the time the type of chemicals they’re making use of. Keep in mind that brushless washes and touchless washes use
It’s not
The identical. Many people see “brushless” and assume that is “touchless”. Avoid the mistake! Make sure you do your homework prior to purchase and ensure that you’re buying the right type of wash.


  • Much less expensive than handwashing
  • Fast
  • Reduces scratching


  • Costlier than automatic and brushless washes.
  • The use of harsh chemicals can cause damage to the finishes
  • Might not be able to remove heavy contamination


Other Methods

We’ve seen people wash their vehicles with every thing you can imagine, from paper towels to Windex. Of course, not because you
isn’t a way to say does not mean
. If it’s not yet used in the past There’s probably an explanation for why. No matter what clever idea you think of the likelihood is that it will cause damage to your work. That’s the worst thing you can do. the effort.

Our Verdict

The most effective way to clean your car’s finish is to handwash.

It’s the least abrasive washing that you can get without sacrificing quality. As with all things in life, there are times when the most effective option isn’t always the best choice. What’s the second best (and fourth, third, fifth , and sixth)? This is our list:

  1. Handwash
  2. Touchless wash (if using gentle soap)
  3. Rinseless wash
  4. Waterless wash
  5. Brushless wash
  6. Automatic wash

Agree? Disagree? Comment below!

Back to Top