Want to change the default password of your Linksys wireless router? Or perform firmware updates? Do you want to hide the network name of your device?
If your answer to all these questions is a big yes, you need to access myrouter.local What happened? Are you facing Linksys router login issues? Oh no! That’s not good. But, fret not. Take the help of the troubleshooting tips mentioned in this post and learn how to log in to your device in a hassle-free manner.
Fixed: Linksys Router Login Issues
1. Reboot Your Linksys Router
Before you do anything else, reboot your Linksys wireless router. Here is how you can restart your wireless device:
- Disconnect your Linksys router from the existing modem.
- Switch off your Linksys router and remove it from the electrical outlet.
- Wait for a couple of minutes.
- Then, insert your device back into the power socket and turn it on.
- Don’t forget to connect the Linksys router and modem again.
If even rebooting your device didn’t help you get rid of the Linksys router login issues, keep reading.
2. Verify the Ethernet Connection
Chances are that the connection between your Linksys wireless router and your modem is not stable. Therefore, check the Ethernet cable connecting your devices. Is it damage-free? If not, it is advised that you get it replaced with a new one.
Or consider the alternative; connect your devices using a wireless source. Now, try to log in to your Linksys router. Any luck?
3. Avoid WiFi Interference
If you are still experiencing Linksys router login issues, it might be because of WiFi interference. Have you placed your router near electronic devices, transmitting appliances, reflexive surfaces, and metal objects,?
Well, change the location of your Linksys router right away and make sure that it is placed away things like cordless phones, televisions, washing machines, Bluetooth speakers, mirrors, fish tanks, baby monitors, treadmills, refrigerators, aluminum studs, microwave ovens, etc. Also, avoid placing your router near concrete walls or in corners.
4. Update Firmware
To do away with the Linksys router login issues, upgrade the firmware of the Linksys router. In order to update your device, you need to access the Linksys WiFi router setup page. Here’s how:
- Connect your Linksys wireless router to the existing router.
- Once a stable connection between your devices has been connected, switch on your WiFi-enabled device.
- In the URL bar of the internet browser, type the default web address of your device.
- Press the Enter key.
- You will be taken to the Linksys router login page.
- When prompted, fill in the default username and password and click Log In.
- Once you find yourself on the main dashboard, go to the Settings menu.
- Click on Maintenance.
- Select Firmware Update.
- And follow the on-screen instructions.
With that, you will successfully be able to perform Linksys router firmware updates.
Note: Access the Linksys Velop login page and follow the instructions mentioned above if you want to update the firmware of your device.
5. Reset Your Linksys Router
If none of the aforementioned steps have worked for you so far, it is recommended that you reset your Linksys wireless router.
Follow the instructions mentioned below and learn how to reset your Linksys router to the factory default settings:
- Find the Reset button located on your wireless device.
- Once found, take an oil pin and insert it in the Reset hole.
- Wait for a couple of seconds and let your device get restored.
Once you are done resetting your Linksys wireless router, reconfigure it by referring to the guidelines given in the user manual.
Summing Up
Ta-da! We hope that after following the aforementioned troubleshooting tips, you will be able to log in to your Linksys wireless router with ease. Now, you can change the default password of your device, hide its network name, update firmware, and do pretty much anything that you want.