Is your Wavlink range extender not broadcasting SSID? If yes, then this post will be your one-stop destination to resolve the issue. All you have to do is give a shot at the troubleshooting techniques discussed in the post. But, before that, have a look at the reasons that create the issue in the first place.
Reasons: Wavlink Extender Not Broadcasting SSID
What kind of device is your Wavlink extender? It’s a networking device, right? Well, then you might be aware of the fact that technical glitches tend to overpower any networking device. Similar might be the situation with your Wavlink extender. So, technical glitches become the first reason why your Wavlink extender is not broadcasting SSID.
Perhaps, you ignored the pending Wavlink firmware update due to which your extender is not broadcasting its WiFi name. Are you aware that firmware is software that controls all activities related to your Wavlink extender? Well, now you are.
Too Much Extender-Router Distance
You might also find yourself struggling with the Wavlink extender not broadcasting SSID issue if your extender is not placed closed to the host router. Know that doing so not only invites internet issues but also makes it difficult for them to propagate WiFi signals.
Damaged Ethernet Cable
If we ask you about the purpose of the Ethernet cable, then your answer will be to establish a direct connection between the Wavlink extender and router. But, this direct connection won’t be of any good if you are using a damaged cable. The damaged Ethernet cable will only manipulate the direct communication instead of facilitating it.
Extender’s Wrong Placement
The placement of your Wavlink extender regulates its performance in an effective manner. The best the location, the best the performance of your Wavlink repeater. But, we can see that you did not place the extender properly after accomplishing the Wavlink setup success.
So, these were the reasons why your Wavlink extender might have stopped broadcasting SSID. Now, let’s check the troubleshooting techniques that need to be given a shot to get the problem resolved.
Fix: Wavlink Extender Not Broadcasting SSID
Reboot Your Extender
Do you remember that we talk about technical glitches in the above section? Well, they are the easiest thing that you can get rid of. The only step you need to take in order to get them resolved is rebooting. Without wasting much of your time, you have to switch off the power supply to your Wavlink device, give it some rest, and switch on the power button back. If it does not help you out, take the help of the next tip.
Update the Firmware
Do Wavlink login and check the firmware on which your range extender is working? Is it the recent version? If not, then you have to download the latest firmware for your extender. However, it is not a difficult task, you have to upload the correct firmware file pertaining to the model number of your extender.
Reduce the Extender-Router Distance
Do yourself some favor and consider bringing your Wavlink extender close to the router to facilitate easy signal propagation. But, what you shouldn’t do is to keep them adjacent to each other. Otherwise, you won’t be able to prevent yourself from running into other technical issues.
Replace the Ethernet Cable
As mentioned in the section disclosing reasons leading you to the issue, you have to check whether the Ethernet cable is all well or not. In case you come across any deep cuts, change the cable with a new one immediately.
Place the Extender Properly
Change the location of your Wavlink range extender and consider placing it far from devices that emanate radio wave frequencies, metal objects, masonry constructions, reflexive surfaces, and large water containers.
That’s all we have to say about getting the Wavlink extender not broadcasting SSID issue fixed. Anticipating that the reasons and tips shared above will help you diagnose and resolve it easily. However, you can opt to do the Wavlink setup again via the ap.setup Wavlink login screen if you run out of time and none of the tips work for you.